Clenli Direct Floor Maintainer 5L

Economical dilution rates. Gives excellent results on all metallised polishes and wet look systems. May be used by damp mopping and spray burnishing. May be used on non-porous floors such as rubber and pure vinyl without the use of polish or seal. Improves resistance to slip. Biocidal effect allows safe use for areas such as hospitals and nursing homes. Highly fragranced to leave room smelling clean and fresh. Surfactants used are biodegradable and phosphate free.

DIRECTIONS FOR USE
Heavily soiled floors should be swept and if necessary, scrubbed with a neutral detergent
before applying.

DAMP MOPPING

Dilute 1 part with 30 parts water. Mop floor with this mixture and allow to
dry. Machine buff using a rotary machine to give a tough, wear resistant gloss film.

SPRAY BURNISH

Dilute 1 part with 20 parts water. Spray this mixture onto the floor (1-2
square meters at a time) and machine buff. If using ultra high speed machines, dilute with 5
parts water. Only use pads which are recommended for buffing. Never use pads which have been used to buff spirit waxes. Not suitable for use on unsealed wood and cork flooring.

STORAGE
Store in original container and protect from extremes of temperature. Do not store in direct sunlight nor allow the product to freeze. Shelf life (in unopened original container) is a minimum of 18 months.